|
Product Details:
Payment & Shipping Terms:
|
| Power: | 100w | LED Chip: | Bridgelux Or Epistar |
|---|---|---|---|
| LED Driver: | Meanwell, Osram, | Material: | Dia-cast Alumium |
| Lamp Body Color: | Gray, Black | Color Temperature: | 2700-6500K |
| Life Span: | 50,000hrs | Warranty: | 3years |
| High Light: | led street lamp,outdoor led street light |
||
Die Casting Led Street Light With Adjustable Pole High Efficiency 135lm/w 100w
Features
· Original Osram chips,138lm/w for whole lamp.
· Sainless steel screws,pass for 72 hours of Salt Spray Test.
· high efficicency aluminum and Heat dissipation fins.
· Instant start, no flashing.
· Low heat and power consumption, best energy saving, safe and efficient.
· Environmental friendly, no UV and IR radiation and does not contain lead, mercury and other pollution elements.
· Durable and energy-saving, long service life up to 50,000 hours.
· High sensitivity, high bright and low consumption.
10KV Surge Protection
Effective lightning protection, lighting safety and personal safety are protected, also to avoid frequent maintenance and reduce maintenance costs.
Specification
| Item NO | CS-DASL-100W |
| Input Voltage(V) | AC100-305V |
| Lamp power | 100w |
| Luminous flux(lm) | 11000 |
| Lamp Luminous Efficiency(lm/w) | 110lm/w |
| LED Chips | SMD3030 |
| Power Factor | 0.9 |
| Color Temperature | 3000K-6500K |
| CRI (Ra>) | >75 |
| Working Temperature(°C) | -20°C~60°C |
| Warranty | 3year |
| IP Rating | IP65 |
| Application | markets, parking lot, billboards, square, etc |
| Piece per Carton | 1Pcs/Ctn |
Detailed Pictures
Application
1.Major Roadways.
2.Residential Streets.
3.Pedestrian Walkways.
4.Parking Lots.
5.Expressway.
6.Docks and Piers.
7.Remote and Rural Locations.
8.High crime areas.
9.square sport grounds.
10.industrial plants and other advertising lights
Quality Control
Professional salt spray test:
The whole housing has been tested for 72 hours of salt spray test. It can be protected against rust for three years.
Other tests
100% of the light will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test its temperature after 24 hours’ lighting.
Then after it is cool we again test 100% of the light to see if it still work well . Each light should pass all these QC procedures before shipping to customer
or by sea which takes about one month to arrive , depending on your actual requirements.
Contact Person: Vera Qin
Tel: +86 13659829313
